The TOPLINK 590W bifacial solar panel combines N-Type TOPCon monocrystalline cells with dual-glass construction for residential, commercial, agricultural and industrial solar installations. With a 590W rated output and module efficiency of up to 22.8%, it provides a high-power option for compatible solar systems.
TOPLINK 590W Bifacial Solar Panel for Increased Solar Generation
The bifacial design captures sunlight from the front and reflected light from the rear. As a result, it can generate additional energy where installation conditions allow useful rear-side exposure. Actual gains depend on ground reflectivity, mounting height, shading and panel spacing.
For example, a raised installation above a reflective surface may provide better rear-side exposure than panels mounted close to a dark roof. Therefore, consider the complete mounting arrangement when planning a bifacial solar array.
N-Type TOPCon Cells and Dual-Glass Construction
N-Type TOPCon cell technology supports efficient solar energy conversion. In addition, the module combines a tempered low-iron glass front with a tempered glass rear and an anodized aluminium alloy frame.
The IP68-rated junction box provides protection against dust and water ingress under its specified test conditions. However, correct mounting, cable management and installation remain essential for outdoor operation.
TOPLINK 590W Bifacial Solar Panel Specifications
- Rated maximum power (Pmax): 590W
- Cell type: N-Type TOPCon monocrystalline
- Module technology: Bifacial dual glass
- Maximum module efficiency: Up to 22.8%
- Power tolerance: 0 to +5W
- Maximum system voltage: 1500V DC (IEC)
- Operating temperature: −40°C to +85°C
- Front glass: 2.0mm tempered low-iron glass
- Rear glass: 2.0mm tempered glass
- Frame: Anodized aluminium alloy
- Junction box: IP68 rated
- Cable: 4mm² solar cable
- Connector: MC4 compatible
- Wind load rating: Up to 2400 Pa
- Snow load rating: Up to 5400 Pa
- Fire rating: Class C
- Application class: Class A
Solar Panels for Residential and Commercial Projects
Whether you are planning a home solar installation, a farm energy system or a commercial array, match panel capacity to your electricity requirements. Ten modules provide a combined front-side rated capacity of 5.9kWp under standard test conditions. Actual output will vary with weather, temperature and system losses.
Before installation, your installer should confirm string voltage, current limits and inverter compatibility. Furthermore, the mounting design must follow the manufacturer’s instructions and account for site conditions. The panel’s maximum system voltage does not mean every inverter can accept that voltage.
Product and Performance Warranty
- Product warranty: 10 years, subject to warranty terms.
- Linear performance warranty: 30 years, subject to the manufacturer’s specified output limits and conditions.
The performance warranty covers the stated power-retention schedule rather than guaranteeing full rated output for 30 years. Review the warranty document for the applicable degradation limits, exclusions and claim requirements.




Reviews
There are no reviews yet.